Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3210E _56 Audio / Visual / Telematics _047511 NAVIGATION / MULTI INFO DISPLAY _0245074 NAVIGATION SYSTEM(for Navigation Receiver Type) T

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area Link
Black screen (no image appears on the navigation/audio screen) Proceed to "Black Screen" Click here
Proceed to "Check Software Error History" in Operation Check Click here
Navigation receiver assembly Click here
Display does not dim when the tail switch is turned on Proceed to "Display does not Dim when Light Control Switch is Turned ON" Click here
Proceed to "Illumination Circuit" Click here
Navigation receiver assembly Click here
Power does not turn off (screen remains on) Proceed to "Navigation Receiver Assembly Power Source Circuit" Click here
Navigation receiver assembly Click here
Screen is distorted Proceed to "Navigation Receiver Assembly Power Source Circuit" Click here
Navigation receiver assembly Click here
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" Click here
Navigation receiver assembly Click here

Panel Switch and Touch Panel Switch Function
Symptom Suspected Area Link
Illumination for panel switches does not come on with tail switch on Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" Click here
Proceed to "Illumination Circuit" Click here
Navigation receiver assembly Click here
Panel switches do not function Proceed to "Panel Switches do not Function" Click here
Navigation receiver assembly Click here
Touch panel switch does not function Proceed to "Touch Panel Switch does not Function" Click here
Proceed to "Navigation Receiver Assembly Power Source Circuit" Click here
Navigation receiver assembly Click here
Navigation function switches can be operated while vehicle being driven Proceed to "Parking Brake Switch Circuit" Click here
Navigation receiver assembly Click here

Steering Pad Switch Function
Symptom Suspected Area Link
System cannot be operated by steering pad switch Proceed to "Panel Switches do not Function" Click here
Proceed to "Steering Pad Switch Circuit" Click here
Navigation receiver assembly Click here
Illumination for steering pad switch does not come on with tail switch on Proceed to "Illumination Circuit" Click here
Navigation receiver assembly Click here

Navigation Function
Symptom Suspected Area Link
GPS mark is not displayed Proceed to "GPS Mark is not Displayed" Click here
Navigation antenna assembly Click here
Navigation receiver assembly Click here
Date and time on navigation screen are different from actual date and time Proceed to "GPS Mark is not Displayed" Click here
Navigation antenna assembly Click here
Navigation receiver assembly Click here
Vehicle position mark deviates from correct position and does not return to correct position Proceed to "GPS Mark is not Displayed" Click here
Navigation antenna assembly Click here
Navigation receiver assembly Click here
Cursor or map rotates when vehicle is stopped Proceed to "Cursor or Map Rotates when Vehicle Stopped" Click here
Navigation receiver assembly Click here
Vehicle position mark moves in the opposite direction to the vehicle Proceed to "Cursor or Map Rotates when Vehicle Stopped" Click here
Proceed to "Reverse Signal Circuit" Click here
Navigation receiver assembly Click here
Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed Proceed to "GPS Mark is not Displayed" Click here
Drive the vehicle for sensor learning (at a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more) -
Navigation antenna assembly Click here
Navigation receiver assembly Click here
Vehicle position mark moves slow or fast Proceed to "GPS Mark is not Displayed" Click here
Navigation antenna assembly Click here
Navigation receiver assembly Click here
Voice guidance does not function Proceed to "Voice Guidance does not Function" Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" Click here
Proceed to "Navigation Voice Circuit" Click here
Proceed to "Speaker Circuit" Click here
Stereo component amplifier assembly Click here
Navigation receiver assembly Click here
Map display is incomplete SD card (disc player disc) -
Navigation receiver assembly Click here
Route cannot be calculated Proceed to "Route cannot be Calculated" Click here
Navigation receiver assembly Click here
Navigation system cannot record memory point registration or each item setting Navigation receiver assembly Click here
A message indicating to wait for a while because of low temperature is displayed Start the engine and increase cabin temperature (near navigation receiver assembly) -
SD card (disc player disc) -
Navigation receiver assembly Click here
A message is displayed because map data cannot be read, and current position screen is not displayed If a message appears only when driving on rough roads, check if the message disappears when vehicle is stopped -
SD card (disc player disc) -
Navigation receiver assembly Click here
Map screen turns white or blue (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally) Change map scale to the smallest (a scale that shows a large area) -
SD card (disc player disc) -
Navigation receiver assembly Click here
Customize parameters cannot be changed (customize parameters can be changed by using the GTS) Navigation receiver assembly Click here
Reverse signal does not change in vehicle signal check mode Proceed to "Reverse Signal Circuit" Click here
Navigation receiver assembly Click here
Parking brake switch signal does not change in vehicle signal check mode Proceed to "Parking Brake Switch Circuit" Click here
Navigation receiver assembly Click here

General Audio Function
Symptom Suspected Area Link
Pressing power switch does not turn on system Proceed to "Navigation Receiver Assembly Power Source Circuit" Click here
Navigation receiver assembly Click here
No sound can be heard from speakers Proceed to "No Sound can be Heard from Speakers" Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" Click here
Proceed to "Speaker Circuit" Click here
Stereo component amplifier assembly Click here
Navigation receiver assembly Click here
Abnormal noise occurs Proceed to "Noise Occurs" Click here
Stereo component amplifier assembly Click here
Navigation receiver assembly Click here
Sound quality is bad in all modes (volume is too low) Check that the ASL function is off -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" Click here
Proceed to "Speaker Circuit" Click here
Stereo component amplifier assembly Click here
Navigation receiver assembly Click here
ASL does not function Check that the ASL function is on -
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter" Click here
Stereo component amplifier assembly Click here
Navigation receiver assembly Click here

FM or AM Radio Function
Symptom Suspected Area Link
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" Click here
Radio broadcast can be received but radio station cannot be displayed (some radio stations do not provide their name information) Navigation receiver assembly Click here
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers Check the volume settings -
Navigation receiver assembly Click here
Radio broadcast can be received but station list cannot be displayed Wait for 120 seconds in radio mode, and select the "Refresh" switch on the station list screen -
Navigation receiver assembly Click here
Radio broadcast can be received but station list cannot be updated Select "Refresh" on the station list screen -
Wait for 10 minutes with the power switch on (ACC), and select "Refresh" on the station list screen again -
Navigation receiver assembly Click here
After the voice recognition function or hands-free function is turned off, the cache radio does not operate Check that the cache radio setting is on -
Navigation receiver assembly Click here
When the cache radio is playing, sound is interrupted, sound cannot be heard or sound quality is poor Check if similar symptoms occur when receiving conventional FM/AM radio broadcasts -
Check if similar symptoms occur when receiving other broadcasts -
Move the vehicle to a place where the reception sensitivity is good and check again -
Navigation receiver assembly Click here
When the cache radio is playing, sound can be heard, but no information is displayed (some radio stations do not provide their name information) Check if similar symptoms occur when receiving other broadcasts -
Move the vehicle to a place where the reception sensitivity is good and check again -
Navigation receiver assembly Click here

Disc Player Function
Symptom Suspected Area Link
Disc cannot be played or player does not function with disc Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player Click here
Proceed to "Check Optical Disc Error History" in Operation Check Click here
Navigation receiver assembly Click here
Disc cannot be inserted/played or disc is ejected right after insertion Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion" Click here
Disc cannot be ejected Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "Disc cannot be Ejected" Click here
Disc sound skips Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD/DVD Sound Skips" Click here
Sound quality is bad only when a disc is played (volume is too low) Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "Sound Quality is Bad Only when Disc is Played (Volume is Too Low)" Click here
While vehicle is stopped, DVD cannot be viewed even when parking brake is applied (parking brake switch is on)* Proceed to "Check Vehicle Signal" in Operation Check Click here
Proceed to "Parking Brake Switch Circuit" Click here
Navigation receiver assembly Click here
Screen color is poor only when watching a DVD* Change the color settings on the screen adjustment screen -
Navigation receiver assembly Click here

*: w/ DVD Player


AUX (Stereo Jack) Function
Symptom Suspected Area Link
External device sound cannot be heard or sound quality is bad (stereo jack is used) Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
"AUX/VTR" is not displayed on system check mode screen Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
Screen is distorted or not displayed only when using the device connected to the No. 1 stereo jack adapter assembly Check if the appropriate image signal setting (NTSC/PAL) is selected -
Connect a known good device to the No. 1 stereo jack adapter assembly and check if the image is output -
Connect using a known good cable and check if an image is output -
Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter"* Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here

*: w/ Video Function


Voice Recognition Function
Symptom Suspected Area Link
Voice menu screen is not displayed (voice recognition function does not turn on) Check if the voice recognition prompt function is on -
Proceed to "Panel Switches do not Function" Click here
Proceed to "Steering Pad Switch Circuit" Click here
Navigation receiver assembly Click here
When voice recognition switch is pressed, a short beep is emitted but voice cannot be recognized properly Proceed to "Voice is not Recognized" Click here
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" Click here
SD card (disc player disc) -
Navigation receiver assembly Click here

"Bluetooth" Hands-free Function
Symptom Suspected Area Link
"Bluetooth" is inoperative (in-vehicle device cannot be recognized by the cellular phone) Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be registered Proceed to "Cellular Phone Registration Failure" Click here
"Bluetooth" compatible cellular phone cannot be connected Check that no other cellular phone is connected as a hands-free device -
Bring the cellular phone near the in-vehicle device and reconnect it -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually) Check that "Bluetooth" automatic connection setting of the in-vehicle device is on -
Navigation receiver assembly Click here
"Bluetooth" compatible cellular phone connection is disconnected Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Message that prompts to check the cellular phone is displayed Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
When the power switch is turned on (ACC), instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed Turn the cellular phone connection conformation display on the in-vehicle device off -
Phonebook data cannot be transferred Check that the phonebook data automatic transfer setting of the in-vehicle device is on -
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required) -
Check that no applications on the cellular phone are operating -
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation -
Transfer phonebook data manually -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Phonebook data is cleared Navigation receiver assembly Click here
Phonebook data cannot be edited Check that the phonebook data automatic transfer setting is off -
Navigation receiver assembly Click here
All the transferred phonebook data is sorted to "Other" Check that no applications on the cellular phone are operating -
Check that phonebook data in the cellular phone is not stored to the SIM card -
Proceed to "Cellular Phone Inspection" Click here
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on cellular phone -
Cellular phone cannot make outgoing/incoming calls Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again -
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth" -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Other caller's voice is interrupted by noise or sound quality is poor Check the receiving voice volume (if it is too high, voice may sound distorted) -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Other caller's voice cannot be heard Check that reception voice volume is not set to minimum -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Caller's voice (your voice) is interrupted by noise or sound quality is poor Check the transmitting voice volume (if it is too high, voice may sound distorted) -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" Click here
Navigation receiver assembly Click here
Other caller cannot hear your voice When talking on the cellular phone, check that the mute button is not pressed -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" Click here
Navigation receiver assembly Click here
No notification when a new SMS/MMS/e-mail has been received Check the SMS/MMS/e-mail notification settings on the cellular phone and the navigation receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
Received SMS/MMS/e-mail cannot be read Check the SMS/MMS/e-mail transfer settings on the cellular phone and the navigation receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here
SMS/MMS/e-mail cannot be replied to Move the vehicle into a cellular phone service area, and check the operation of the navigation receiver assembly and cellular phone -
Check that the cellular phone can send an SMS/MMS/e-mail -
Proceed to "Cellular Phone Inspection" Click here
Navigation receiver assembly Click here

"Bluetooth" Audio Function
Symptom Suspected Area Link
Portable player cannot be registered Proceed to "Portable Player cannot be Registered" Click here
Navigation receiver assembly Click here
Portable player cannot be connected manually/automatically Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Navigation receiver assembly Click here
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth" Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Navigation receiver assembly Click here
Sound of portable player cannot be heard from speakers, or sound is low Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" Click here
Navigation receiver assembly Click here
Portable player does not play even after "Bluetooth" audio mode is selected Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Navigation receiver assembly Click here
Portable player does not play Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Navigation receiver assembly Click here
Track information such as track number, track name, elapsed play time and playlist is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Navigation receiver assembly Click here
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Navigation receiver assembly Click here
Battery condition of portable player is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Navigation receiver assembly Click here
"Bluetooth" signal condition is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Navigation receiver assembly Click here
Portable player cannot pause, select file, fast forward, fast rewind, play at random Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Navigation receiver assembly Click here
Noise occurs or sound skips when portable player plays Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" Click here
Navigation receiver assembly Click here
Registered device cannot be deleted Proceed to "Registered Device cannot be Deleted" Click here
Navigation receiver assembly Click here

USB Audio System Function
Symptom Suspected Area Link
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to "Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
USB device or "iPod" is not recognized Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
Track information such as track, artist and album names is not displayed Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
USB device or "iPod" is recognized but cannot play or play in a sorted order Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
"iPod" battery cannot be charged Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here
Screen is distorted or not displayed only when using the video function of an "iPod" Check if the "iPod" is set to output images -
Check if the appropriate image signal setting (NTSC/PAL) is selected -
Check if video sound input is set to A/V mode -
Connect using a known good cable and check if an image is output -
Proceed to "Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Navigation receiver assembly Click here

Fuel Consumption Function
Symptom Suspected Area Link
"Fuel Consumption" icon is dimmed Check if other icons or items displayed on screen have any problems -
Navigation receiver assembly Click here
Graph is not displayed on "Trip Information" screen Recheck with the hybrid control system operating -
Navigation receiver assembly Click here
Cruise range is not displayed on "Trip Information" screen Turn the power switch on (IG) and recheck -
Navigation receiver assembly Click here
Graph is not updated on "Past record" screen even though "Clear" is selected Turn the power switch on (IG) and recheck -
Navigation receiver assembly Click here
Graph is not displayed on "Past record" screen Turn the power switch on (IG) and recheck -
Navigation receiver assembly Click here

Toyota Link Function (w/ Toyota Link Function)
Symptom Suspected Area Link
A Toyota Link function error message is displayed on the screen Follow the on screen instructions -
Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Navigation receiver assembly Click here
Toyota Link apps and services are not operating as expected Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Navigation receiver assembly Click here
Toyota Link voice recognition is not possible (voice recognition on the navigation system is normal) Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Navigation receiver assembly Click here
Sound quality of Toyota Link function is poor Toyota Link function Check that cellular phone handset volume is turned up -
Check that adequate signal is maintained during driving -
Proceed to "Confirm Cellular Phone Functionality" Click here
Proceed to "Confirm Vehicle Headunit Functionality" Click here
Proceed to "Toyota Link Reset Procedure" in Operation Check Click here
Navigation receiver assembly Click here

Digital TV Function (w/ Digital TV Function)
Symptom Suspected Area Link
While vehicle is stopped, digital TV image is not displayed Check that the parental lock is unlocked -
Check if similar symptoms occur with another vehicle -
Proceed to "TV Screen is Distorted" Click here
Image stops, noise occurs, or screen color is distorted only when watching digital TV Check the settings of the display quality adjustment screen
(check that each setting is set to the default)
-
Check if similar symptoms occur with another broadcast -
Proceed to "TV Screen is Distorted" Click here
Sound cannot be heard, sound quality is poor or sound is interrupted only when watching digital TV Check the settings of the sound quality adjustment screen
(check that each setting is set to the default)
-
Check if similar symptoms occur with another broadcast -
Proceed to "TV Screen is Distorted" Click here
Channels cannot be set (broadcast stations cannot be found by scanning) Move the vehicle to a place where the reception is good and check again -
Proceed to "TV Screen is Distorted" Click here
Broadcast station names are not displayed Check if similar symptoms occur with another broadcast -
Move the vehicle to a place where the reception is good and check again -
Proceed to "TV Screen is Distorted" Click here
Parental lock setting cannot be changed On the parental lock identification number input screen, press the left arrow switch 10 times and reset the number -

Digital Audio Broadcast (DAB) Function (w/ DAB Function)
Symptom Suspected Area Link
Sound cannot be heard/sound quality is poor/loud noise occurs only when DAB function is used (when receiving DAB-TA, sound temporarily may not be heard) Operate the volume switch and turn up the volume -
Proceed to "Check DAB Reception" in Operation Check Click here
Antenna cord sub-assembly (for radio antenna) Click here
No. 2 antenna cord sub-assembly Click here
No. 5 antenna cord sub-assembly Click here
Digital audio broadcasting antenna assembly Click here
Navigation receiver assembly Click here
When time shift mode is not selected, DAB-TA cannot be used Check if DAB-TA function is set to on -
Check that "TP" icon is displayed on the screen -
Check if similar symptoms occur with another vehicle -
Navigation receiver assembly Click here
DAB-DAB Link, DAB-FM Link or Time-Shift cannot be used Check if each function is set to on -
Check if similar symptoms occur when receiving other broadcasts -
Navigation receiver assembly Click here