Home › General › MAINTENANCE › ENGINE › 2015.10–2016.08
RM3090E _V1 General _008732 MAINTENANCE _0049626 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Perform these procedures after the engine has cooled down.


PROCEDURE

Hide 1.INSPECT DRIVE BELT

a.

Inspect the drive belt.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 2.REPLACE ENGINE OIL AND OIL FILTER

a.

Replace the engine oil and oil filter.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 3.INSPECT COOLING AND HEATER SYSTEM

Check that the radiator and condenser are not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.

Hide 4.INSPECT ENGINE COOLANT

a.

Inspect the engine coolant.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 5.REPLACE ENGINE COOLANT

a.

Replace the engine coolant.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 6.INSPECT OIL COOLER (for 2AR, w/Oil Cooler)

a.

Visually check the oil cooler for leaks.


Hide 7.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 8.REPLACE SPARK PLUGS

a.

Replace the spark plugs.

Type See procedure
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)


Hide 28800 9.INSPECT BATTERY

a.

Inspect the battery.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 10.REPLACE FUEL FILTER

a.

Replace the fuel filter.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (w/ Canister Pump Module) (Click here)
2AR-FE (w/o Canister Pump Module) (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 11.ADD FUEL INJECTION SYSTEM (for 3ZR-FAE)

a.

for French Guiana, Guadeloupe, Martinique, Estonia, Latvia, Romania, Macedonia, Bosnia and Herzegovina, Serbia, Montenegro, and Croatia:

Add fuel injector cleaner to the fuel tank.


Hide 12.INSPECT WATER SEDIMENT ACCUMULATOR (for Diesel)

a.

Inspect the water sediment accumulator.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2WW (Click here)


Hide 17801 13.INSPECT AIR CLEANER FILTER ELEMENT

a.

Remove the air filter.


b.
A156094

Check that the air cleaner is not excessively dirty.

If the air cleaner is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air filter.


e.

When an excessive amount of dirt is present, replace the air filter.


Hide 77310A 14.INSPECT FUEL TANK CAP GASKET

a.

Check the fuel tank cap gasket.

Type See procedure
2AD-FHV (Click here)
2AD-FTV (Click here)
2AR-FE (w/ Canister Pump Module) (Click here)
2AR-FE (w/o Canister Pump Module) (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)
2WW (Click here)


Hide 15.INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS

a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


b.

Check for tank band looseness or deformation.


Hide 77740 16.INSPECT CHARCOAL CANISTER

a.

Inspect the charcoal canister.

Type See procedure
2AR-FE (w/ Canister Pump Module) (Click here)
2AR-FE (w/o Canister Pump Module) (Click here)
3ZR-FAE (Click here)
3ZR-FE (Click here)