| All interior light control functions do not operate under any condition.
|
Map light assembly
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Actuation area-linked control function does not operate when registered key is brought into any exterior detection area (w/ Entry and Start System).
|
CAN communication system (for HV Model)
|
|
| CAN communication system (for Gasoline Model)
|
|
| Entry and start system (for Entry Function, Gasoline Model)
|
|
| Entry and start system (for Entry Function, HV Model)
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Door lock/unlock-linked control function does not operate when doors are locked/unlocked.
|
Door unlock detection switch circuit
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Door open/close-linked control function does not operate when doors are opened/closed.
|
Door courtesy switch circuit
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Push start switch illumination does not illuminate (w/ Entry and Start System).
|
Push start switch illumination circuit
|
|
| Certification ECU (smart key ECU assembly)
|
Refer to Service Bulletin
|
| Push start switch illumination does not blink (w/ Entry and Start System).
|
Certification ECU (smart key ECU assembly)
|
Refer to Service Bulletin
|
| Push start switch-linked control function does not operate when push start switch is operated (w/ Entry and Start System).
|
IG signal circuit
|
|
| ACC signal circuit
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Ignition switch-linked control function does not operate when ignition switch is operated (w/o Entry and Start System).
|
IG signal circuit
|
|
| ACC signal circuit
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Vehicle speed-linked control function does not operate when parking brake switch assembly is turned off and the vehicle speed is detected (for Manual Transaxle).
|
CAN communication system (for Gasoline Model)
|
|
| Manual transaxle system (for EG62)
|
|
| Manual transaxle system (for EG62F)
|
|
| SFI system (for M20A-FKS)
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|
| Shift position-linked control function does not operate when shift lever to P (except Manual Transaxle).
|
Automatic transaxle system (for UB80E)
|
|
| Automatic transaxle system (for UB80F)
|
|
| Hybrid control system (for HV Model)
|
|
| Main body ECU (multiplex network body ECU) (for LHD)
|
|
| Main body ECU (multiplex network body ECU) (for RHD)
|
|