Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for CrewMax)

AUDIO AND VISUAL SYSTEM (for CrewMax) > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Before inspecting the suspected areas listed in the table below, check the fuses and relays.
  2. Before inspecting the suspected areas listed in the table below, check for DTCs.
  3. Methods used to verify the cause of the problem are listed in order of probability in the suspected area column.


Audio Function: 
Symptom
Suspected Area
See page
Pressing power switch does not turn on system.
Proceed to "Pressing Power Switch does not Turn on System"
Click here
Radio receiver power source circuit
Click here
AVC-LAN circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Panel switch does not function.
Steering pad switch circuit
Click here
AVC-LAN circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
No sound can be heard from speakers. (Audio is mute.) (for separate type amplifier system)
Radio receiver power source circuit
Click here
Proceed to "No Sound can be Heard from Speakers"
Click here
Stereo component amplifier power source circuit
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Speaker circuit (Independent Amplifier)
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Stereo component amplifier
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
No sound can be heard from speakers. (Audio is mute.) (for built-in type amplifier system)
Radio receiver power source circuit
Click here
Proceed to "No Sound can be Heard from Speakers"
Click here
Speaker circuit (Built-in Amplifier)
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Sound quality is bad in all modes. (Volume is too low.) (for separate type amplifier system)
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
Click here
Speaker circuit (Independent Amplifier)
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Stereo component amplifier
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Sound quality is bad in all modes. (Volume is too low.) (for built-in type amplifier system)
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
Click here
Speaker circuit (Built-in Amplifier)
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
ASL does not function. (for separate type amplifier system)
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
Click here
ASL does not function. (for built-in type amplifier system)
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
External device sound cannot be heard or sound quality is bad. (Stereo jack is used.)
Radio receiver power source circuit
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
Click here
Stereo jack adapter (for Column Shift Type)
Click here
Stereo jack adapter (for Floor Shift Type)
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Abnormal noise occurs. (for separate type amplifier system)
Proceed to "Noise occurs"
Click here
Stereo component amplifier
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Abnormal noise occurs. (for built-in type amplifier system)
Proceed to "Noise occurs"
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Radio broadcast cannot be received or poor reception.
Proceed to "Radio Broadcast cannot be Received (Poor Reception)"
Click here
CD cannot be inserted / played or CD is ejected right after insertion.
Radio receiver power source circuit
Click here
Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion"
Click here
CD cannot be ejected.
Radio receiver power source circuit
Click here
Proceed to "CD cannot be Ejected"
Click here
Sound quality is bad only when CD is played. (Volume is too low.)
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)"
Click here
CD sound skips.
Proceed to "CD Sound Skips"
Click here
Radio receiver cannot be illuminated at night.
Illumination circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here

Steering Pad Switch Function: 
Symptom
Suspected Area
See page
Audio system cannot be operated with steering pad switch.
Steering pad switch circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Steering pad switch cannot be illuminated at night.
Illumination circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here

"Bluetooth" Function*: 
Symptom
Suspected Area
See page
Cellular phone registration failure, phone directory transfer failure.
Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
Click here
Cellular phone cannot send / receive.
Proceed to "Cellular Phone cannot Send / Receive"
Click here
Steering pad switch circuit
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
The other caller's voice cannot be heard, is too quiet, or distorted.
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted"
Click here
Proceed to "Cellular Phone Voice Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here
Stereo component amplifier
Click here
The other caller cannot hear your voice, or your voice is too quiet or distorted.
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
Click here
Roof console box assembly (Built-in microphone)
Click here
Radio receiver (for Column Shift Type)
Click here
Radio receiver (for Floor Shift Type)
Click here

HINT:
*: w/ Built-in "Bluetooth" Receiver Antenna