Audio Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system.
| Proceed to "Pressing Power Switch does not Turn on System"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "AVC-LAN Circuit"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Panel switch does not function.
| Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Proceed to "AVC-LAN Circuit"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
No sound can be heard from speakers (Audio is mute.) (w/ Stereo Component Amplifier).
| Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "Stereo Component Amplifier Power Source Circuit"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Television Display Assembly"*4
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Mute Signal Circuit between Multi-media Interface ECU and Television Display Assembly"*4
|
Click here
|
Proceed to "Speaker Circuit (Independent Amplifier)"
|
Click here
|
Replace stereo component amplifier assembly
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Replace multi-media interface ECU
|
Click here
|
Replace television display assembly*4
|
Click here
|
No sound can be heard from speakers (Audio is mute.) (w/o Stereo Component Amplifier).
| Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "Speaker Circuit (Built-in Amplifier)"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Sound quality is bad in all modes (Volume is too low.) (w/ Stereo Component Amplifier).
| Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
Click here
|
Proceed to "Speaker Circuit (Independent Amplifier)"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Television Display Assembly"*4
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Mute Signal Circuit between Multi-media Interface ECU and Television Display Assembly"*4
|
Click here
|
Replace stereo component amplifier assembly
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Replace television display assembly*4
|
Click here
|
Replace multi-media interface ECU
|
Click here
|
Sound quality is bad in all modes (Volume is too low.) (w/o Stereo Component Amplifier).
| Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
Click here
|
Proceed to "Speaker Circuit (Built-in Amplifier)"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
ASL does not function (w/ Stereo Component Amplifier).
| Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
|
Click here
|
ASL does not function (w/o Stereo Component Amplifier).
| Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
External device sound cannot be heard or sound quality is bad (Stereo jack is used.).
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Multi-media Interface ECU"*3
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"*3
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Multi-media Interface ECU"*3
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Abnormal noise occurs (w/ Stereo Component Amplifier).
| Proceed to "Noise occurs"
|
Click here
|
Replace stereo component amplifier assembly
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Abnormal noise occurs (w/o Stereo Component Amplifier).
| Proceed to "Noise occurs"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Radio broadcast cannot be received or poor reception.
| Proceed to "Radio Broadcast cannot be Received (Poor Reception)"
|
Click here
|
CD cannot be inserted/played or CD is ejected right after insertion.
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "CD cannot be Inserted/Played or CD is Ejected Right After Insertion"
|
Click here
|
CD cannot be ejected.
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Proceed to "CD cannot be Ejected"
|
Click here
|
Sound quality is bad only when CD is played (Volume is too low.).
| Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)"
|
Click here
|
CD sound skips.
| Proceed to "CD Sound Skips"
|
Click here
|
Radio receiver cannot be illuminated at night.
| Proceed to "Illumination Circuit"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" Function
Symptom
| Suspected Area
| See page
|
Cellular phone registration failure, phone directory transfer failure.
| Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
|
Click here
|
Cellular phone cannot send/receive.
| Proceed to "Cellular Phone cannot Send/Receive"
|
Click here
|
Proceed to "Steering Pad Switch Circuit"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
The other callers voice cannot be heard, is too quiet, or distorted.
| Proceed to "The Other Callers Voice cannot be Heard, is too Quiet, or Distorted"
|
Click here
|
Proceed to "Cellular Phone Voice Circuit between Radio Receiver and Stereo Component Amplifier"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Replace stereo component amplifier assembly
|
Click here
|
The other caller cannot hear your voice, or your voice is too quiet or distorted.
| Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Replace telephone microphone assembly
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" Audio Function*1
Symptom
| Suspected Area
| See page
|
Portable player cannot be registered
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player cannot be connected manually/automatically
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/ Automatically"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Sound of portable player cannot be heard from speakers, or sound is low
| Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player does not play even after "Bluetooth" audio mode is selected
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player does not play
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Track information such as track number, track name and elapsed play time is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Battery condition of portable player is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" signal condition is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player cannot pause, select files, fast forward, rewind, random play or scan
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Noise occurs or sound skips when portable player plays
| Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
Registered device cannot be deleted
| Proceed to "Registered Device cannot be Deleted"
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
USB Audio System Function*3
Symptom
| Suspected Area
| See page
|
USB audio sound cannot be heard or sound quality is bad. (Stereo jack is used.)
| Proceed to "Multi-media Interface ECU Power Source Circuit"
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Proceed to "Mute Signal Circuit between Radio Receiver and Multi-media Interface ECU"
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Replace multi-media interface ECU
|
Click here
|
Replace radio receiver assembly (for Column Shift Type)
|
Click here
|
Replace radio receiver assembly (for Floor Shift Type)
|
Click here
|
USB device or "iPod" is not recognized.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Replace multi-media interface ECU
|
Click here
|
Track information such as track, artist and album names are not displayed.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Replace multi-media interface ECU
|
Click here
|
USB device or "iPod" is recognized but cannot play nor play in a sorted order.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
Proceed to "Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter"
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
Replace No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Replace multi-media interface ECU
|
Click here
|