Display function
Symptom
| Suspected area
| See page
|
Pressing power switch does not turn on system.
| 1. Multi-display power source circuit
|
Click here
|
2. AVC-LAN circuit
|
Click here
|
3. Multi-display
| -
|
No image appears on multi-display.
| 1. Proceed to "No image Appears on Multi-display"
|
Click here
|
2. Multi-display power source circuit
|
Click here
|
3. Illumination circuit
|
Click here
|
4. AVC-LAN circuit
|
Click here
|
5. Multi-display
| -
|
Illumination for panel switch does not come on with TAIL switch on.
| 1. Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
|
Click here
|
2. Illumination circuit
|
Click here
|
3. Multi-display
| -
|
Display does not dim when light control switch is turn on.
| 1. Proceed to "Display does not DIM when Light Control Switch is Turn ON"
|
Click here
|
2. Illumination circuit
|
Click here
|
3. Multi-display
| -
|
Power does not turn off (The screen remains on).
| 1. Multi-display power source circuit
|
Click here
|
2. Multi-display
| -
|
Panel switches do not function.
| 1. Proceed to "Panel Switches do not Function"
|
Click here
|
2. Steering pad switch circuit
|
Click here
|
3. Multi-display power source circuit
|
Click here
|
4. Multi-display
| -
|
Touch panel switch does not function.
| 1. Proceed to "Touch Panel Switch does not Function"
|
Click here
|
2. Steering pad switch circuit
|
Click here
|
3. Multi-display power source circuit
|
Click here
|
4. Multi-display
| -
|
Navigation screen is not displayed.
| 1. Display signal circuit between navigation ECU and multi-display
|
Click here
|
2. Map disc
| -
|
3. Navigation ECU
| -
|
4. Multi-display
| -
|
Navigation screen flicker or color distortion.
| 1. Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
2. Display signal circuit between navigation ECU and multi-display
|
Click here
|
3. Navigation ECU
| -
|
4. Multi-display
| -
|
Navigation function switches can be operated while vehicle is running.
| Vehicle speed signal circuit between multi-display and combination meter
|
Click here
|
Navigation function
Symptom
| Suspected area
| See page
|
Map disc cannot be inserted.
| 1. Proceed to "Map Disc cannot be inserted"
|
Click here
|
2. Navigation ECU power source circuit
|
Click here
|
3. Navigation ECU
| -
|
Map disc cannot be ejected.
| 1. Proceed to "Map Disc cannot be Ejected"
|
Click here
|
2. Navigation ECU power source circuit
|
Click here
|
3. Navigation ECU
| -
|
Vehicle position mark deviates greatly.
| 1. Proceed to "Vehicle Position Mark Deviates Greatly"
|
Click here
|
2. GPS antenna
| -
|
3. Navigation ECU
| -
|
Cursor or map rotates when vehicle is stopped.
| 1. Proceed to "Cursor or Map Rotates when Vehicle is Stopped"
|
Click here
|
2. Navigation ECU
| -
|
Vehicle position mark is not updated.
| 1. Proceed to "Vehicle Position Mark is not Updated"
|
Click here
|
2. Map disc
| -
|
3. Navigation ECU
| -
|
Current position display does not appear.
| 1. Proceed to "Current Position Display does not Appear"
|
Click here
|
2. Map disc
| -
|
3. GPS antenna
| -
|
4. Navigation ECU
| -
|
GPS mark is not displayed.
| 1. Proceed to "GPS Mark is not Displayed"
|
Click here
|
2. GPS antenna
| -
|
3. Navigation ECU
| -
|
Voice guidance does not function.
| 1. Proceed to "Voice Guidance does not Function"
|
Click here
|
2. Navigation voice speaker circuit
|
Click here
|
3. Map disc
| -
|
4. Navigation ECU
| -
|
5. Stereo component amplifier
| -
|
Map display incomplete.
| 1. Proceed to "Map Display Incomplete"
|
Click here
|
2. Map disc
| -
|
3. Navigation ECU
| -
|
Route cannot be calculated.
| 1. Proceed to "Route cannot be Calculated"
|
Click here
|
2. Map disc
| -
|
3. Navigation ECU
| -
|
Voice recognition difficulty.
| 1. Proceed to "Voice Recognition Difficulty"
|
Click here
|
2. Navigation ECU
| -
|
Voice is not recognized.
| 1. Proceed to "Voice is not Recognized"
|
Click here
|
2. Microphone circuit between overhead J/B and multi-display
|
Click here
|
3. Microphone circuit between multi-display and navigation ECU
|
Click here
|
4. Steering pad switch circuit
|
Click here
|
5. Microphone
| -
|
6. Microphone amplifier
| -
|
7. Navigation ECU
| -
|
Speed signal does not change in the navigation check mode.
| Vehicle speed signal circuit between navigation ECU and combination meter
|
Click here
|
Reverse signal does not change in the navigation check mode.
| Reverse Signal Circuit
|
Click here
|
Steering pad switch function
Symptom
| Suspected area
| See page
|
The system cannot be operated by the steering pad switch.
| 1. Steering pad switch circuit
|
Click here
|
2. Radio receiver
| -
|
3. Air conditioning amplifier
| -
|
Illumination for steering pad switch does not come on with tail switch on.
| 1. Illumination circuit
|
Click here
|
2. Radio receiver
| -
|
3. Air conditioning amplifier
| -
|
Cellular phone registration failure, phone directory transfer failure.
| Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
|
Click here
|
Cellular phone cannot send / receive.
| 1. Proceed to "Cellular phone cannot Send / Receive"
|
Click here
|
2. Steering pad switch circuit
|
Click here
|
3. Multi-display
| -
|
Cannot call in a certain place.
| Proceed to "Cannot call in a Certain Place"
|
Click here
|
The other caller's voice cannot be heard, is too quiet, or distorted.
| 1. Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted"
|
Click here
|
2. Multi-display
| -
|
The other caller cannot hear your voice, or your voice is too quiet or distorted.
| 1. Proceed to "The Other Caller cannot hear your voice, or Your Voice is too Quiet or Distorted"
|
Click here
|
2. Microphone circuit between overhead J/B and multi-display
|
Click here
|
3. Microphone
| -
|
4. Microphone amplifier
| -
|
5. Multi-display
| -
|