| "Opening" display malfunction
|
Combination meter assembly
|
|
| "ECO saving" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "ECO score" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Current fuel consumption" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After refuel)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Distance (Range)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average speed (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average speed (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Elapsed time (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Elapsed time (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Distance (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Drive Information" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Eco driving indicator zone" display malfunction (w/ Eco Drive Indicator Light)
|
Check customize setting
|
|
| CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| ECM (for 1GD-FTV)
|
|
| ECM (for 2GD-FTV)
|
|
| ECM (for 1KD-FTV)
|
|
| ECM (for 2TR-FE)
|
|
| ECM (for 1GR-FE)
|
|
| ECM (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Other (Blank)" display malfunction
|
Combination meter assembly
|
|
| "Outside temp" display malfunction
|
Thermistor assembly (ambient temperature sensor)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Icy street warning" display malfunction
|
Thermistor assembly (ambient temperature sensor)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Drive information tab" display malfunction
|
Combination meter assembly
|
|
| "Navigation tab" display malfunction (w/ Navigation System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Navigation system
|
|
| Combination meter assembly
|
|
| "Audio tab" display malfunction (w/ Audio and Visual System [for Radio and Display Type])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Navigation system (w/ Navigation System)
|
|
| Audio and Visual System (for Radio and Display Type)
|
|
| Combination meter assembly
|
|
| "Cruise control operation guide tab" display malfunction (w/ Cruise Control System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Cruise control system
|
|
| Combination meter assembly
|
|
| "Message tab" display malfunction
|
Combination meter assembly
|
|
| "Setting tab" display malfunction
|
Combination meter assembly
|
|
| "Smart Entry & Start System malfunction See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Steering wheel lock Press engine switch while turning wheel" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress brake and then touch key to engine switch" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and then touch key to engine switch" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key not detected Check key location" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress brake and then start engine" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and then start engine" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key battery low" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Turn off vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Shift to P before exiting vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Power turned off to save battery" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Push and hold engine switch for emergency stop" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Shift to N and press engine switch to restart" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and press engine switch to restart" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key left inside vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "ACCESSORY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "IGNITION ON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Low oil pressure Stop in a safe place See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
Engine oil pressure switch assembly (for 1GD-FTV)
|
|
| Engine oil pressure switch assembly (for 2GD-FTV)
|
|
| Engine oil pressure switch assembly (for 1KD-FTV)
|
|
| Engine oil pressure switch assembly (for 2KD-FTV)
|
|
| Engine oil pressure switch assembly (for 2TR-FE)
|
|
| Engine oil pressure switch assembly (for 1GR-FE)
|
|
| Engine oil pressure switch assembly (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Engine oil level low Add or replace" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Tachometer and engine coolant temperature receiver gauge are operate normally) (for GD Series Engine)
|
Engine oil level sensor (for 1GD-FTV)
|
|
| Engine oil level sensor (for 2GD-FTV)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Transmission fluid temp high See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD, Automatic Transmission)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Automatic transmission system (AC60F, for 1GR-FE)
|
|
| Automatic transmission system (AC60F, for 1GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2TR-FE)
|
|
| Combination meter assembly
|
|
| "Transmission system malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD, Automatic Transmission)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Automatic transmission system (AC60F, for 1GR-FE)
|
|
| Automatic transmission system (AC60F, for 1GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2TR-FE)
|
|
| Combination meter assembly
|
|
| ECM (for 1GD-FTV)
|
|
| "Cruise control malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Cruise Control System)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Cruise control system
|
|
| Combination meter assembly
|
|
| "iMT system malfunction visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Intelligent Manual Transmission)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Manual transmission system
|
|
| Combination meter assembly
|
|
| "Accelerator and brake pedals depressed simultaneously" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Brake override malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Check Engine Reduced engine power Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Check Engine Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Reduced engine power Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Engine maintenance required Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Water accumulation in fuel filter See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Diesel Engine)
|
Level warning switch (for 1GD-FTV)
|
|
| Level warning switch (for 2GD-FTV)
|
|
| Level warning switch (for 1KD-FTV)
|
|
| Level warning switch (for 2KD-FTV)
|
|
| Level warning switch (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Replace fuel filter" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Diesel Engine)
|
Fuel filter assembly (clogging switch) (for 1KD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 2KD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 1GD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 2GD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Headlight system malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for LED Headlight)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Lighting system
|
|
| Automatic headlight beam level control system
|
|
| Combination meter assembly
|
|
| "2WD-4WD mode change malfunction visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Touch select 2-4 and high-low system
|
|
| Combination meter assembly
|
|
| 4 wheel drive control ECU
|
|
| "Differential oil temp high Cooling time required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Differential system (w/ Differential Lock)
|
|
| Combination meter assembly
|
|
| "Differential oil temp high Shift to 2WD mode Cooling time required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Differential system (w/ Differential Lock)
|
|
| Combination meter assembly
|
|
| "TRC turned off" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ VSC)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| Vehicle stability control system
|
|
| Combination meter assembly
|
|
| "Windshield washer fluid low" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Washer Fluid Level Warning System)
|
Roceed to "Washer Fluid Level Warning Switch Circuit"
|
|
| Combination meter assembly
|
|
| "Oil maintenance required soon" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD System (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD System (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "Oil maintenance required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD System (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD System (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "Resetting oil maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD System (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD System (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "Resetting of oil maintenance data incomplete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD System (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD System (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "Resetting of oil maintenance data complete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 1GD-FTV, 2GD-FTV)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD System (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD System (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "T-BELT maintenance required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting T-BELT maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting T-BELT maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| T-BELT maintenance mileage message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting of T-BELT maintenance data now possible" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting of T-BELT maintenance data complete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Over 120km/h" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Middle East)
|
Combination meter assembly
|
|
| "DPF full See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "DPF full Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "Manual regeneration in process Keep flammables away from vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "DPF regeneration in process" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "DPF manual regeneration available" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|
| "DPF full Manual regeneration required See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD)
|
|
| CAN communication system (for RHD)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| Combination meter assembly
|
|