Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM
RM27L0U _56 Audio / Visual / Telematics _049331 PARK ASSIST / MONITORING _0235792 BLIND SPOT MONITOR SYSTEM S

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  DIAGNOSTIC TROUBLE CODE CHART  


HINT:

If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.


DTC Code Detection Item See page
C1A45 Vehicle Speed Sensor (Click here)
C1A47 Steering Angle Sensor (Click here)
C1AB0 Short to +B in Outer Mirror Indicator(Master) (Click here)
C1AB1 Short to +B in Outer Mirror Indicator(Slave) (Click here)
C1AB2 Short to GND in Outer Mirror Indicator(Master) (Click here)
C1AB3 Short to GND in Outer Mirror Indicator(Slave) (Click here)
C1AB4 Open in Outer Mirror Indicator(Master) (Click here)
C1AB5 Open in Outer Mirror Indicator(Slave) (Click here)
C1AB6 Blind Spot Monitor Master Module (Click here)
C1AB7 Blind Spot Monitor Slave Module (Click here)
C1AB8 Destination Information Undefined (Click here)
C1ABA Blind Spot Monitor Slave Module Connection Incorrect (Click here)
C1ABB* Blind Spot Monitor Master Module Beam Axis Inspection Incomplete (Click here)
C1ABC* Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete (Click here)
U0100 Lost Communication with ECM / PCM "A" (Click here)
U0126 Lost Communication with Steering Angle Sensor Module (Click here)
U0129 Lost Communication with Brake System Control Module (Click here)
U0142 Lost Communication with Body Control Module "B" (Click here)
U0232 Lost Communication with Blind Spot Monitor Slave Module (Click here)
U0233 Lost Communication with Blind Spot Monitor Master Module (Click here)
U1331 Software Incompatibility with Body Control Module "B" (Click here)

HINT:

*: When the blind spot monitor sensor is replaced, this DTC is stored, but it does not indicate a malfunction.