Tightening Torque Specifications
Precautions: Precautions for Diagnosing Trouble · Precautions for Disassembly and Reassembly · Precautions for Transmission / Transaxle · General safety (00)
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Oil drain plug | 21 | 2.1 | 15.5 |
 |
| Smart drive unit nut | 4.5 | 0.46 | 3.5 |
|
| Select lever nut | 13 | 1.3 | 9.5 |
|
| Select lever knob screw | 2.5 | 0.25 | 2.0 |
|
| Twin clutch system actuation fluid reservoir bolt No.1 | 10 | 1.0 | 7.5 |
|
| Twin clutch system actuation fluid reservoir bolt No.2 | 10 | 1.0 | 7.5 |
|
| Solenoid valve unit bolt | 20 | 2.0 | 15.0 |
|
| Solenoid valve unit lower bolt | 20 | 2.0 | 15.0 |
|
| Hydraulic system filter bolt | 6.0 | 0.61 | 4.5 |
|
| Electric motor bolt | 10 | 1.0 | 7.5 |
|
| Accumulator | 110 | 11.2 | 81.5 |
|
| Accumulator pipe flare nut | 18 | 1.8 | 13.5 |
|
| Parking unit bolt | 26 | 2.7 | 19.5 |
|
| Oil pan bolt | 10 | 1.0 | 7.5 |
|
| Parking position sensor bolt | 11 | 1.1 | 8.5 |
|
| Transaxle case bolt | 26 | 2.7 | 19.5 |
|
| Transfer adaptor bolt | 85 | 8.7 | 63.0 |
|
| Gear mounting retaining bolt | 100 | 10.2 | 74.0 |
|
| Right bearing outer race mounting plate bolt No.1 (M12) | 80 | 8.2 | 59.0 |
|
| Right bearing outer race mounting plate bolt No.2 (M8) | 26 | 2.7 | 19.5 |
|
| Lower countershaft nut | 110 | 11.2 | 81.5 |
|
| Upper countershaft bolt | 110 | 11.2 | 81.5 |
|
| Final gear bolt | 35 N·m → +50° (3.6 kgf-m → +50°, 26.0 lbf-ft → +50°) |
|
||
| Odd gear clutch control actuator bolt | 10 | 1.0 | 7.5 |
|
| Odd gear clutch assembly bolt | 25 | 2.5 | 18.5 |
|
| Even gear clutch assembly mounting bolt | 20 | 2.0 | 15.0 |
|
| Even gear clutch control actuator bolt | 10 | 1.0 | 7.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: