Warning Lights
Symptom
|
Suspected Area
|
See page
|
MIL warning light does not come on
|
CAN communication system
|
Click here
|
Perform Active Test (Check Engine Indicator)
|
Click here
|
SFI system (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
SFI system (for 2TR-FE [w/ Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/o Secondary Air Injection System])
|
Click here
|
ECD system (for 2KD-FTV)
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
Combination meter assembly
|
Click here
|
CHARGE warning light does not come on
|
Perform Active Test (Indicat. Lamp Charge)
|
Click here
|
Harness or connector (for 2TR-FE [w/o Dual VVT-i], 1KD-FTV, 2KD-FTV or 5L-E)
|
-
|
CAN communication system (for 1TR-FE, 2TR-FE [w/ Dual VVT-i])
|
Click here
|
Generator assembly (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
Generator assembly (for 2KD-FTV)
|
Click here
|
Generator assembly (for 5L-E)
|
Click here
|
Generator assembly (for 1KD-FTV)
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
SFI system (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
Combination meter assembly
|
Click here
|
BRAKE warning light does not come on
|
Perform Active Test (Indicat. Lamp Brake)
|
Click here
|
Harness or connector
|
-
|
Brake actuator assembly (skid control ECU)*1, *20
|
Click here
|
Brake actuator assembly (skid control ECU)*21
|
Click here
|
Parking brake switch assembly
|
Click here
|
Brake master cylinder reservoir sub-assembly
|
Click here
|
Combination meter assembly
|
Click here
|
BRAKE warning light does not go off
|
Perform Active Test (Indicat. Lamp Brake)
|
Click here
|
Harness or connector
|
-
|
Brake actuator assembly (skid control ECU)*1, *20
|
Click here
|
Brake actuator assembly (skid control ECU)*21
|
Click here
|
Parking brake switch assembly
|
Click here
|
Brake master cylinder reservoir sub-assembly
|
Click here
|
Combination meter assembly
|
Click here
|
ABS warning light does not come on*1
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp ABS)
|
Click here
|
Anti-lock brake system*20
|
Click here
|
Vehicle stability control system*21
|
Click here
|
Combination meter assembly
|
Click here
|
ABS warning light does not go off*1
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp ABS)
|
Click here
|
Anti-lock brake system*20
|
Click here
|
Vehicle stability control system*21
|
Click here
|
Combination meter assembly
|
Click here
|
AIRBAG warning light does not come on*2
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp Airbag)
|
Click here
|
Airbag system
|
Click here
|
Combination meter assembly
|
Click here
|
AIRBAG warning light does not go off*2
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp Airbag)
|
Click here
|
Airbag system
|
Click here
|
Combination meter assembly
|
Click here
|
DOOR warning light does not come on
|
Harness or connector
|
-
|
Door courtesy light switch assembly
|
Click here
|
Combination meter assembly
|
Click here
|
FUEL warning light does not come on
|
Perform Active Test (Indicat. Lamp Fuel)
|
Click here
|
Fuel sender gauge assembly (for 1TR-FE)
|
Click here
|
Fuel sender gauge assembly (for 2TR-FE)
|
Click here
|
Fuel sender gauge assembly (for 1KD-FTV)
|
Click here
|
Fuel sender gauge assembly (for 2KD-FTV)
|
Click here
|
Fuel sender gauge assembly (for 5L-E)
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
OIL warning light does not come on*8
|
Perform Active Test (Indicat. Oil Pressure)
|
Click here
|
Harness or connector
|
-
|
Engine oil pressure switch (for 1TR-FE)
|
Click here
|
Engine oil pressure switch (for 2TR-FE)
|
Click here
|
Engine oil pressure switch (for 1KD-FTV [w/o DPF])
|
Click here
|
Engine oil pressure switch (for 2KD-FTV)
|
Click here
|
Engine oil pressure switch (for 5L-E)
|
Click here
|
Combination meter assembly
|
Click here
|
OIL warning light does not come on*9
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Oil Pressure)
|
Click here
|
ECD system
|
Click here
|
Combination meter assembly
|
Click here
|
Front seat belt warning light does not come on
|
Perform Active Test (Driver Side Seat Belt, Front Passenger Side Seat Belt)
|
Click here
|
Seat belt warning system
|
Click here
|
Combination meter assembly
|
Click here
|
Brake override system warning light does not come on
|
CAN communication system
|
Click here
|
Perform Active Test (Brake Override Indicator)
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
LED headlight warning light does not come on*12, *13
|
CAN communication system
|
Click here
|
Perform Active Test (LED Head Lamp Warning)
|
Click here
|
Headlight leveling ECU assembly (for LHD)
|
Click here
|
Headlight leveling ECU assembly (for RHD)
|
Click here
|
Combination meter assembly
|
Click here
|
Speed warning light does not come on (Speedometer operate normally)*4
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Over Speed)
|
Click here
|
Combination meter assembly
|
Click here
|
Master warning light does not come on (Other systems operate normally)*14
|
Combination meter assembly
|
Click here
|
Indicator Lights
Symptom
|
Suspected Area
|
See page
|
Turn indicator light does not come on
|
Perform Active Test [Turn Signal (Left) Indicator, Turn Signal (Right) Indicator]
|
Click here
|
Harness or connector
|
-
|
Lighting system
|
Click here
|
Combination meter assembly
|
Click here
|
BEAM indicator light does not come on
|
Harness or connector
|
-
|
Headlight dimmer switch assembly
|
Click here
|
Combination meter assembly
|
Click here
|
GLOW indicator light does not come on*3
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat GLOW)
|
Click here
|
ECD system (for 2KD-FTV)
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
Combination meter assembly
|
Click here
|
TAIL indicator light does not come on
|
Perform Active Test (Indicat. Lamp Tail)
|
Click here
|
Harness or connector
|
-
|
Headlight dimmer switch assembly
|
Click here
|
Combination meter assembly
|
Click here
|
Fr FOG indicator light does not come on*17
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
Rr FOG indicator light does not come on*18
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
OIL LEVEL indicator light does not come on
|
Perform Active Test (Indicat. Lamp Oil Level)
|
Click here
|
Engine oil level sensor (for 1TR-FE)
|
Click here
|
Engine oil level sensor (for 2TR-FE)
|
Click here
|
Engine oil level sensor (for 1KD-FTV)
|
Click here
|
Engine oil level sensor (for 2KD-FTV)
|
Click here
|
Engine oil level sensor (for 5L-E)
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
T-BELT indicator light does not come on*3
|
Perform Active Test (Indicat. Timing Belt)
|
Click here
|
T-BELT Indicator Setting
|
Click here
|
Combination meter assembly
|
Click here
|
SEDIMENT/FILTER indicator light does not come on*3
|
Perform Active Test (Indicat. Lamp Water Level, Fuel Filter Indicator)
|
Click here
|
Harness or connector
|
-
|
Fuel filter assembly (for 1KD-FTV)
|
Click here
|
Fuel filter assembly (for 2KD-FTV)
|
Click here
|
Fuel filter assembly (for 5L-E)
|
Click here
|
SEDIMENT/FILTER indicator light
|
Click here
|
Combination meter assembly
|
Click here
|
Security indicator light does not come on*6, *10
|
Harness or connector
|
-
|
Transponder Key ECU
|
-
|
Combination meter assembly
|
Click here
|
Security indicator light does not come on*11
|
Harness or connector
|
-
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
Eco driving indicator light does not come on*7
|
Check customize setting
|
Click here
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. ECONO)
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
DPF indicator light does not come on*9
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. ECONO)
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
Headlight beam level control system indicator light does not come on*12, *13
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Headlamp Auto Leveling)
|
Click here
|
Headlight leveling ECU assembly (for LHD)
|
Click here
|
Headlight leveling ECU assembly (for RHD)
|
Click here
|
Combination meter assembly
|
Click here
|
Smart entry indicator light does not come on*11
|
CAN communication system
|
Click here
|
Perform Active Test (Smart System Indicator, Smart System Warning)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
Cruise control indicator light does not come on*15
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp Cruise, Cruise Indicator)
|
Click here
|
Cruise control system
|
Click here
|
Combination meter assembly
|
Click here
|
SET indicator light does not come on*15
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. SET)
|
Click here
|
Cruise control system
|
Click here
|
Combination meter assembly
|
Click here
|
Slip indicator light does not come on*21
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. Lamp Slip)
|
Click here
|
Vehicle stability control system
|
Click here
|
Combination meter assembly
|
Click here
|
VSC OFF indicator light does not come on*21
|
CAN communication system
|
Click here
|
Perform Active Test (Indicat. VSC OFF)
|
Click here
|
Vehicle stability control system
|
Click here
|
Combination meter assembly
|
Click here
|
TRC OFF indicator light does not come on*21
|
CAN communication system
|
Click here
|
Perform Active Test (VSC TRC Indicator)
|
Click here
|
Vehicle stability control system
|
Click here
|
Combination meter assembly
|
Click here
|
Display
Symptom
|
Suspected Area
|
See page
|
Outside temperature display malfunction
|
Ambient temperature sensor
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
Road surface ice display malfunction (outside temperature display operates normally)
|
Combination meter assembly
|
Click here
|
Current fuel consumption display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
Click here
|
Average fuel consumption after refueling display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
Click here
|
Cruising range display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
Click here
|
Rheostat display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
Click here
|
ODO/TRIP meter display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
Click here
|
DTCs display malfunction (Others system operates normally)
|
Combination meter assembly
|
Click here
|
Eco driving indicator zone display malfunction*14
|
Check customize setting
|
Click here
|
CAN communication system
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
Clock display malfunction
|
Combination meter assembly
|
Click here
|
Shift position indicator malfunction*7
|
CAN communication system
|
Click here
|
Automatic transmission system (A340E)
|
Click here
|
Automatic transmission system (A343E)
|
Click here
|
Automatic transmission system (AC60E)
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
DPF indicator malfunction*9
|
CAN communication system
|
Click here
|
ECD system
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
"HOLDING IN ENGINE SWITCH WILL CAUSE AN EMERGENCY ENGINE STOP." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"TO RESTART CAR, SHIFT LEVER TO N AND PRESS ENGINE SWITCH." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"THE ENGINE HAS STOPPED. PLEASE PUT SHIFT LEVER INTO P." message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Combination meter assembly operates normally)*14
|
Combination meter assembly
|
Click here
|
"THE ENGINE HAS STOPPED. PLEASE STOP YOUR CAR IN A SAFE PLACE." message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Combination meter assembly operates normally)*14
|
Combination meter assembly
|
Click here
|
"TO RESTART CAR, SHIFT LEVER TO N AND TURN KEY." message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Combination meter assembly operates normally)*10, *14
|
Combination meter assembly
|
Click here
|
"THE ACCELERATOR IS STUCK. PLEASE DEPRESS BRAKE PEDAL TO STOP CAR." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
CAN communication system
|
Click here
|
SFI system (for 2TR-FE [w/ Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/o Secondary Air Injection System])
|
Click here
|
ECD system (for 2KD-FTV [w/o Dual VVT-i])
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
"AUTO POWER OFF TO CONSERVE BATTERY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
CAN communication system
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"SHIFT TO P POSITION WHEN PARKED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*7, *11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Brake warning light operates normally)*14
|
Combination meter assembly
|
Click here
|
"KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"CHECK ENTRY & START SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Smart entry and start system (for Entry Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"CHECK CRUISE CONTROL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14, *15
|
CAN communication system
|
Click here
|
Cruise control system
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
Combination meter assembly
|
Click here
|
"ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8, *14
|
Engine oil pressure switch (for 1TR-FE)
|
Click here
|
Engine oil pressure switch (for 2TR-FE)
|
Click here
|
Engine oil pressure switch (for 1KD-FTV [w/o DPF])
|
Click here
|
Engine oil pressure switch (for 2KD-FTV)
|
Click here
|
Engine oil pressure switch (for 5L-E)
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
"ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9, *14
|
CAN communication system
|
Click here
|
ECD system
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
"TURN POWER OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Entry Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"KEY DETECTED IN VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Entry Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Start Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"THE ACCELERATOR IS STUCK. PLEASE CHECK THE ACCELERATOR." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
CAN communication system
|
Click here
|
SFI system (for 2TR-FE [w/ Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/o Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECD system (for 2KD-FTV)
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
"STEERING LOCK ACTIVE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Steering lock system
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"BRAKE OVERRIDE SYSTEM FAILURE." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
CAN communication system
|
Click here
|
SFI system (for 2TR-FE [w/ Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/o Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECD system (for 2KD-FTV)
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
"KEY BATTERY LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *14
|
CAN communication system
|
Click here
|
Smart entry and start system (for Entry Function)
|
Click here
|
Certification ECU (smart key ECU assembly)
|
-
|
Combination meter assembly
|
Click here
|
"DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *14
|
Fuel filter assembly (for 1KD-FTV)
|
Click here
|
Fuel filter assembly (for 2KD-FTV)
|
Click here
|
Fuel filter assembly (for 5L-E)
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
"ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
Engine oil level sensor (for 1TR-FE)
|
Click here
|
Engine oil level sensor (for 2TR-FE)
|
Click here
|
Engine oil level sensor (for 1KD-FTV)
|
Click here
|
Engine oil level sensor (for 2KD-FTV)
|
Click here
|
Engine oil level sensor (for 5L-E)
|
Click here
|
Harness or connector
|
-
|
Combination meter assembly
|
Click here
|
"CHECK HEADLIGHT SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *14
|
CAN communication system
|
Click here
|
Lighting system
|
Click here
|
Headlight leveling ECU assembly (for LHD)
|
Click here
|
Headlight leveling ECU assembly (for RHD)
|
Click here
|
Combination meter assembly
|
Click here
|
"DPF FULL ENGINE SERVICE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9, *14
|
CAN communication system
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
"BOTH ACCELERATOR AND BRAKE PEDALS ARE DEPRESSED." message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14
|
CAN communication system
|
Click here
|
SFI system (for 2TR-FE [w/ Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/o Secondary Air Injection System])
|
Click here
|
SFI system (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECD system (for 2KD-FTV)
|
Click here
|
ECD system (for 5L-E)
|
Click here
|
ECD system (for 1KD-FTV [w/o DPF])
|
Click here
|
ECD system (for 1KD-FTV [w/ DPF])
|
Click here
|
SFI system (for 1TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/o Dual VVT-i])
|
Click here
|
ECM (for 2TR-FE [w/ Dual VVT-i])
|
Click here
|
ECM (for 2KD-FTV)
|
Click here
|
ECM (for 5L-E)
|
Click here
|
ECM (for 1KD-FTV)
|
Click here
|
ECM (for 1TR-FE)
|
Click here
|
Combination meter assembly
|
Click here
|
"T-BELT MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *14
|
T-BELT Indicator Setting
|
Click here
|
Combination meter assembly
|
Click here
|
"DPF FULL SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9, *14
|
CAN communication system
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
"DPF MANUAL REGENERATION IN PROCESS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9, *14
|
CAN communication system
|
Click here
|
ECM
|
Click here
|
Combination meter assembly
|
Click here
|
Multi-information display is missing dots
|
Combination meter assembly
|
Click here
|
The settings cannot be customized through the multi-information display
|
Combination meter assembly
|
Click here
|