| "Opening" display malfunction
|
Combination meter assembly
|
|
| "ECO saving" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "ECO score" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Current fuel consumption" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After refuel)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average fuel consumption (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Distance (Range)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average speed (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Average speed (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Elapsed time (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Elapsed time (After reset)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Distance (After start)" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Drive Information" display malfunction (Combination meter assembly operates normally)
|
Combination meter assembly
|
|
| "Idling stop time" display malfunction (w/ Stop and Start System)
|
Check customize setting
|
|
| CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Stop and start system
|
|
| Combination meter assembly
|
|
| Engine stop and start ECU
|
|
| "Eco driving indicator zone" display malfunction (w/ Eco Drive Indicator Light)
|
Check customize setting
|
|
| CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| ECM (for 1GD-FTV)
|
|
| ECM (for 2GD-FTV)
|
|
| ECM (for 1KD-FTV)
|
|
| ECM (for 2TR-FE)
|
|
| ECM (for 1GR-FE)
|
|
| ECM (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Other (Blank)" display malfunction
|
Combination meter assembly
|
|
| "Outside temp" display malfunction
|
Thermistor assembly (ambient temperature sensor)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Icy street warning" display malfunction
|
Thermistor assembly (ambient temperature sensor)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Drive information tab" display malfunction
|
Combination meter assembly
|
|
| "Navigation tab" display malfunction (w/ Navigation System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Navigation system
|
|
| Combination meter assembly
|
|
| "Audio tab" display malfunction (w/ Audio and Visual System [for Radio and Display Type])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Navigation system (w/ Navigation System)
|
|
| Audio and visual system (for Radio and Display Type)
|
|
| Combination meter assembly
|
|
| "Cruise control operation guide tab" display malfunction (w/ Cruise Control System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Cruise control system
|
|
| Combination meter assembly
|
|
| "Driving support tab" display malfunction (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Message tab" display malfunction
|
Combination meter assembly
|
|
| "Setting tab" display malfunction
|
Combination meter assembly
|
|
| "Smart Entry & Start System malfunction See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Steering wheel lock Press engine switch while turning wheel" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress brake and then touch key to engine switch" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and then touch key to engine switch" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key not detected Check key location" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress brake and then start engine" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and then start engine" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key battery low" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Turn off vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Shift to P before exiting vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Power turned off to save battery" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Push and hold engine switch for emergency stop" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Shift to N and press engine switch to restart" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Automatic Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Depress clutch and press engine switch to restart" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System [for Manual Transmission])
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Key left inside vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "ACCESSORY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "IGNITION ON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Entry and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Entry and start system (for Entry Function)
|
|
| Entry and start system (for Start Function)
|
|
| Combination meter assembly
|
|
| "Low oil pressure Stop in a safe place See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
Engine oil pressure switch assembly (for 1GD-FTV)
|
|
| Engine oil pressure switch assembly (for 2GD-FTV)
|
|
| Engine oil pressure switch assembly (for 1KD-FTV)
|
|
| Engine oil pressure switch assembly (for 2KD-FTV)
|
|
| Engine oil pressure switch assembly (for 2TR-FE)
|
|
| Engine oil pressure switch assembly (for 1GR-FE)
|
|
| Engine oil pressure switch assembly (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Engine oil level low Add or replace" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Tachometer and engine coolant temperature receiver gauge operate normally) (for GD Series Engine)
|
Engine oil level sensor (for 1GD-FTV)
|
|
| Engine oil level sensor (for 2GD-FTV)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Transmission fluid temp high See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD, Automatic Transmission)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Automatic transmission system (AC60F, for 1GR-FE)
|
|
| Automatic transmission system (AC60F, for 1GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2TR-FE)
|
|
| Combination meter assembly
|
|
| "Transmission system malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD, Automatic Transmission)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Automatic transmission system (AC60F, for 1GR-FE)
|
|
| Automatic transmission system (AC60F, for 1GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2GD-FTV)
|
|
| Automatic transmission system (AC60F, for 2TR-FE)
|
|
| Combination meter assembly
|
|
| ECM (for 1GD-FTV)
|
|
| "Cruise control malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Cruise Control System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Cruise control system
|
|
| Combination meter assembly
|
|
| "iMT system malfunction visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Intelligent Manual Transmission)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Manual transmission system
|
|
| Combination meter assembly
|
|
| "Accelerator and brake pedals depressed simultaneously" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Brake override malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Check Engine Reduced engine power Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Check Engine Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Reduced engine power Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Engine maintenance required Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| ECD system (for 1KD-FTV)
|
|
| ECD system (for 2KD-FTV)
|
|
| SFI system (for 2TR-FE)
|
|
| SFI system (for 1GR-FE)
|
|
| ECD system (for 5L-E)
|
|
| Combination meter assembly
|
|
| "Water accumulation in fuel filter See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Diesel Engine)
|
Level warning switch (for 1GD-FTV)
|
|
| Level warning switch (for 2GD-FTV)
|
|
| Level warning switch (for 1KD-FTV)
|
|
| Level warning switch (for 2KD-FTV)
|
|
| Level warning switch (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Replace fuel filter" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Diesel Engine)
|
Fuel filter assembly (clogging switch) (for 1KD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 2KD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 1GD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 2GD-FTV)
|
|
| Fuel filter assembly (clogging switch) (for 5L-E)
|
|
| Harness or connector
|
-
|
| Combination meter assembly
|
|
| "Headlight system malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for LED Headlight)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lighting system
|
|
| Automatic headlight beam level control system
|
|
| Combination meter assembly
|
|
| "2WD-4WD mode change malfunction visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Touch select 2-4 and high-low system
|
|
| Combination meter assembly
|
|
| 4 wheel drive control ECU
|
|
| "Differential oil temp high Cooling time required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Differential system (w/ Differential Lock)
|
|
| Combination meter assembly
|
|
| "Differential oil temp high Shift to 2WD mode Cooling time required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 4WD)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Differential system (w/ Differential Lock)
|
|
| Combination meter assembly
|
|
| "TRC turned off" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ VSC)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Vehicle stability control system
|
|
| Combination meter assembly
|
|
| "Windshield washer fluid low" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Washer Fluid Level Warning System)
|
Proceed to "Washer Fluid Level Warning Switch Circuit"
|
|
| Combination meter assembly
|
|
| "Oil maintenance required soon" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| Combination meter assembly
|
|
| "Oil maintenance required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| Combination meter assembly
|
|
| "Resetting oil maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| Combination meter assembly
|
|
| "Resetting of oil maintenance data incomplete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Oil Maintenance Required Reminder)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| Combination meter assembly
|
|
| "Resetting of oil maintenance data complete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for 1GD-FTV, 2GD-FTV)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| ECD system (for 2GD-FTV, w/o EGR Cooler)
|
|
| Combination meter assembly
|
|
| "T-BELT maintenance required" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting T-BELT maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting T-BELT maintenance data" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| T-BELT maintenance mileage message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting of T-BELT maintenance data now possible" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Resetting of T-BELT maintenance data complete" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for KD Series Engine, 5L-E)
|
Combination meter assembly
|
|
| "Over 120km/h" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Middle East)
|
Combination meter assembly
|
|
| "DPF full See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "DPF full Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Manual regeneration in process Keep flammables away from vehicle" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "DPF regeneration in process" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "DPF manual regeneration available" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "DPF full Manual regeneration required See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ DPF)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 1GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ DPF)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "AdBlue level low Fill up AdBlue in *** km See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit km)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "AdBlue level low Fill up AdBlue in *** miles See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit mils)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "AdBlue level low No start in *** km! Fill up AdBlue See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit km)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "AdBlue level low No start in *** miles! Fill up AdBlue See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit mils)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "AdBlue empty Unable to restart engine Fill up AdBlue See owner's manual" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Emissions too high Check AdBlue Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Emissions too high No start in*** km! Check AdBlue Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit km)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Emissions too high No start in *** miles! Check AdBlue Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System, Unit km)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Emissions too high Unable to restart engine Check AdBlue Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Urea SCR System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| ECD system (for 2GD-FTV, w/ Urea SCR System)
|
|
| Combination meter assembly
|
|
| "Check RSA system." message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Road Sign Assist System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Road sign assist system
|
|
| Combination meter assembly
|
|
| "Road sign assist system display" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Road Sign Assist System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Road sign assist system
|
|
| Combination meter assembly
|
|
| "BRAKE!" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-crash Safety System Display" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-Crash Safety Off" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-Crash Safety Alert (SYMBOL)" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-Crash Safety Malfunction Visit Your Dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-Crash Safety Unavailable" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "VSC Turned Off Pre-Crash Brake System Unavailable" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Forward Camera System Unavailable" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Forward Camera System Unavailable Clean Windshield" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Pre-Crash Safety Unavailable Clean Sensor" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "CHECKING PRE-CRASH BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Adjusting front radar beam" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Adjusting front radar beam Error" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Adjusting front radar beam along vertical axis" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Adjusting front radar beam along horizontal axis" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Pre-crash Safety System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Pre-crash safety system
|
|
| Combination meter assembly
|
|
| "Adjusting LDA camera" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "LDA unavailable camera overheated" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "LDA malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "LDA unavailable Below approx 50km/h" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System, Unit km/h)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "LDA unavailable Below approx 32 MPH" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System, Unit MPH)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "LDA unavailable at current speed" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "Vehicle swerving detected (SYMBOL) Break suggested" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "Repeated lane departures (SYMBOL) Take a break" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Lane Departure Alert System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Lane departure alert system
|
|
| Combination meter assembly
|
|
| "Stop & Start system malfunction Visit your dealer" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Stop and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Stop and start system
|
|
| Combination meter assembly
|
|
| Engine stop and start ECU
|
|
| "Longer idle stop time Low cooling/heating output" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Stop and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Stop and start system
|
|
| Combination meter assembly
|
|
| Engine stop and start ECU
|
|
| "Normal idle stop mode active Balanced cooling/heating output" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Stop and Start System)
|
CAN communication system (for LHD without Central Gateway ECU)
|
|
| CAN communication system (for RHD without Central Gateway ECU)
|
|
| CAN communication system (for LHD with Central Gateway ECU)
|
|
| CAN communication system (for RHD with Central Gateway ECU)
|
|
| Stop and start system
|
|
| Combination meter assembly
|
|
| Engine stop and start ECU
|
|